A beautiful solid panelled Oak or Cedar timber Gate, styled by our Gate Designer Daniel Weir and crafted using the finest high grade joinery timber, and formed using fine joinery techniques, this stunning gate makes an elegant first impression of your property. The Brook’s joinery configuration is pure traditional joinery method, using mortice & tenon joints, zero screws or bolts. Its horizontal cross rails flow end to end with no joints, running through its vertical frame rails via fully morticed joints. The Brook comes as standard with flush fitted with bespoke stainless steel ironmongery, for manual gate applications, or tailored to suit either sliding or swing gate automated options. Brook posts are furnished with the full weather tops to match the Brook’s vertical stiles, post sizes are determined by gate size and application type. Every Brook is built to order, making it possible for us to configure your new gate to the exact opening width you require, tailored to the nearest centimetre.
Kiln Dried Oak (natural oil finish(
Western Red Cedar (natural oil finish)
Acoya Spray Painted
Gate Widths: 0.9m - 4.2m
Gate Heights: 1.8m (from base to top of stile)
Frame Thickness: 45-65mm
We can supply and install this beautiful gate configuration gate/s as either a Manual Gate system or an Automated Gate system, with either sliding or swing gate systems. Based upon the site characteristics and your requirements, our team will provide guidance and advice for your application, then recommend the most suitable system.
We can provide this stunning gate system in both Manual and Automated configurations, based upon the site characteristics and your requirements, our team will provide guidance and advice for your application, then recommend the most suitable system.
Have your gate engraved with your House Name or anything you require. Our bespoke engraving service can enable you to have your gate engraved within a suitable position on the gate frame or the posts, aligned in either horizontal or vertical format. Please ask a member of our team for more details.
All our gates can be supplied in various formats, either Fully Installed in either a Manual or Automated system, or as a Supply Only service for DIY installers. Our sales team are also on hand to provide you with a “Quick Initial Estimate/s” based on your outline requirements, we also provide a “Fixed Price Quotation/s” for all systems once you are satisfied with your estimated costs and all site dimensions/characteristics have been identified.
Single or Two Gate Swing systems or Single Sliding Gate system, with standard Safety Photocells (Closing Movement) & Obstacle Detection
SINGLE SWING GATE SYSTEM
NICE UNDERGROUND ONE MOTOR SYSTEM
Single Gate system, 1 Control Panel, 1 Underground Motor + Ground box, 2 Remote handheld remotefobs, 1 x Receiver module, Manual release unlocking key for powercuts, built in Obstacle Detection sensitivity.
DOUBLE SWING GATE SYSTEM
NICE UNDERGROUND TWO MOTOR SYSTEM
Two Gate system, 1 Control Panel, 2 Underground Motors + Ground boxs, 2 Remote handheld remotefobs, 1 x Receiver module, Manual release unlocking key for powercuts, built in Obstacle Detection sensitivity.
SLIDING GATE SYSTEM
CENTURION SLIDING GATE MOTOR SYSTEM
Single Gate system, 1 Control Panel, 1 Aboveground Motor, 2 Remote handheld remotefobs, 1 x Receiver module, Manual release unlocking ability, Battery back-up included for powercuts, built in Obstacle Detection sensitivity.
Here at Oakleigh Manor, we highly recommend additional Safety Features, our Gate Engineers will recommend these features for any potential hazards on your gate system.
ANTI-CRUSH/SHEAR SAFETY EDGES
Pressure sensors installed within potential hazard zones of your swing gate or sliding gate system, protecting users within potential crush or shear zones of your gate (Our Gate Engineer will advise on Hazard zones).
IR Beams positioned within additional zones of your gates movement
Additional sets of IR Beams provide additional Safety features for gates that provide a risk to the Users (Our Gate Engineer will advise on Hazard zones).
Flashing Light to warn users that your Gate is about to perform a movement (Opening or Closing).
Our Swing & Sliding gate systems can be fitted with any of these additional options, tailoring your gates to suit you.
PIN CODE ACCESS KEYPADS
Keypads can be added to any of our gate systems to allow PIN code access of your choice to Entry & Exit points on your gates.
PROXIMITY READERS PERSONALISED TO YOUR TAGS
Proximity Readers can be added to any of our gate systems to allow access for any Tag holders to Entry & Exit points on your gates.
KEYED ACCESS FOR YOUR GATES
Keyswitches can be added to any of our gate systems to allow access for any Key holders to Entry & Exit points on your gates.
IN-GROUND VEHICLE DETECTOR
In- ground Loop Detectors can be fitted underneath the surface of your gate approach for exit or entry points, can be used in conjunction with a timed facility to allow Vehicle Detection within safe periods of the day or week.
GSM GATE OPENER
GSM GATE OPENER
GSM openers give you the ability to Open your Gates from any mobile phone, anywhere in the world. SIM card required, no call costs are generated. Not required with GSM or WIFI Intercom systems.
GATE OPEN BUTTON
PUSH BUTTON GATE OPENER
A simple Push Button Opener can be fitted onto your gate to provide access control on either the entry or exit side of your gates, subject to the security requirements on your entrance.
SECRET PUSH BUTTON
SECRETLY LOCATED PUSH BUTTON GATE OPENER
Tiny & Secretly located Push Buttons can be added to your Gate system to provide Opening ability to anyone who knows the location of the button, handy for the occasions when you have not got a fob with you and want to quickly open the gates with no hassle.
TIMED ACCESS CONTROL UNIT
Timer units can be fitted to our Gate systems to provide timed opening periods if your would like your gates open all day, or certain parts of a day, they can also be fitted in conjunction with Vehicle Detectors or Push Buttons to allow timed use of the Access devices.
LOCKABLE CONTROL EQUIPMENT CABINET
Increase the security of your system with a Lockable Cabinet to house all your Gate Control Equipment, essential if you have additional add-on equipment within your system or if security is a risk.
Communicate with your visitors, with one of our Intercom systems, compatible with all our Gate Control systems
WIFI ABILITY INTERCOM SYSTEMS
Our Wifi Intercoms come in Voice only or Video communication, you can communicate with visitors and open your gates via optional Internal House Monitors or Direct to your smart phone. Wifi Booster or cabling may be required for long distances in-between the House and your Gates.
HARD WIRED INTERCOMS
HARD INTERCOM SYSTEMS
Our Hard Wired Intercoms come in Voice only or Video communication, to communicate with visitors and open your gates from the House. Cabling is required inbetween the House and your Gates.
WIRELESS VOICE INTERCOMS
Our Wireless Voice Intercoms provide Voice communication to with visitors and the ability to open your gates from the House. No cabling required, works 500m range with no obstructions, 200m range with Concrete/Masonry wall obstructions.
GSM VOICE & VIDEO INTERCOM
Our GSM Intercoms come in Voice only or Video communication, you can communicate with visitors and open your gates via your smart phone. Good GSM signal is essential for reliable operation, SIM card required with ongoing monthly & call charges.
Simply complete our Online Enquiry Form or call the Oakleigh Manor team on 0800 023 1310 to discuss your requirements. Our team can guide you through the options available for all our services, provide initial budgets or arrange an Initial Site Visit from one of our friendly team.